eSun PLA + 2.85mm Filament 1 kg – Bits4Bots

eSun have made the move to Cardboard Spools. You can find out more about this here. You may receive a mix of different types of spools as we work through our stock. PLEASE NOTE for Bambu Labs AMS users - The Cardboard spools will be able to be used in the AMS with the help of the ring adapters. The link to download the
eSun have made the move to Cardboard Spools. You can find out more about this here. You may receive a mix of different types of spools as we work through our stock. PLEASE NOTE for Bambu Labs AMS users - The Cardboard spools will be able to be used in the AMS with the help of the ring adapters. The link to download the STL for the adaptors can be found above. You will however NOT be able to close the lid of the AMS while in use Specification Diameter: 2.85mm (+/- 0.05mm) Extrusion Temp 205 ~ 225 C Build Plate Temp (OPTIONAL) No heat/ (60 ~ 80) C Biomaterial extracted from corn grain, natural degradable and pollution-free for environment; high rigidity, good gloss and transparency; printing process is non-toxic and tasteless, no curling.PLA+ has additional additives added into its regular PLA. These additional additives improve the strength of the filament (at least 2 times tougher than regular PLA). PLA has a higher tendency to snap under pressure, where PLA+ is more likely to bend. It also gives a smoother surface finish. PLA+ is also better with dealing with bridging and overhangs so there is less stringing and supports are not required as often. PLA+ is our best seller as it is a very easy to use filament. You will need to print at a slightly higher temperature than regular PLA. We recommend PLA+ especially for those larger prints. DISCLAIMER: BITS4BOTS LIMITED nor any of its Subsidiaries has any material liability (whether known or unknown, whether asserted or unasserted, whether absolute or contingent, whether accrued or unaccrued, whether liquidated or unliquidated, and whether due or to become due) arising out of any injury to individuals or property as a result of the ownership, possession or use of any product manufactured, sold, leased or delivered by BITS4BOTS LIMITED or any of its Subsidiaries.