Esun PLA - LW Light Weight 3D Printer Filament 1kg 1.75mm

Features:ePLA-LW (Lightweight PLA) is a material specially developed by eSUN for the fields of model airplanes, drones, and COSPLAY. Compared with WOOD, ePLA-LW has more stable interlayer bonding, and the foaming rate and strength can be controlled by adjusting the printing temperature. Use active foaming technology to achieve lightweight, low-density PLA parts. The foaming volume ratio is 220%, and when printing the same volume model, 1 roll of ePLA-LW can be used as 2.2 rolls of ordinary PLA. Foaming makes the layered pattern almost invisible, and the surface of the printed item is matte and delicate. At around 210-270°C, this material starts to foam during printing, increasing its volume by nearly 1.2 times, and the printing extrusion rate can be reduced to 45% to print lightweight parts.Under the same model and at the same speed, the use of lightweight PLA
Features:ePLA-LW (Lightweight PLA) is a material specially developed by eSUN for the fields of model airplanes, drones, and COSPLAY. Compared with WOOD, ePLA-LW has more stable interlayer bonding, and the foaming rate and strength can be controlled by adjusting the printing temperature. Use active foaming technology to achieve lightweight, low-density PLA parts. The foaming volume ratio is 220%, and when printing the same volume model, 1 roll of ePLA-LW can be used as 2.2 rolls of ordinary PLA. Foaming makes the layered pattern almost invisible, and the surface of the printed item is matte and delicate. At around 210-270°C, this material starts to foam during printing, increasing its volume by nearly 1.2 times, and the printing extrusion rate can be reduced to 45% to print lightweight parts.Under the same model and at the same speed, the use of lightweight PLA enables the model aircraft to have a lighter wing load and a lower stall speed. For models such as airplanes, under the condition of balanced strength, reducing the weight as much as possible can greatly improve the performance of the airplane. Product features:Low density, up to 0.54g/cm3The foaming volume ratio is 220%, and 1 roll of ePLA-LW is equivalent to 2.2 rolls of ordinary PLAFree adjustment of strength and foaming ratioExcellent surface effect, matte and delicateGood adhesion between layers, resistant to explosion and easy to repairEasy to paint, strong surface paint adhesionExcellent printability, large models do not warp, do not block, and do not need a constant temperature chamber

eSUN ePLA-LW Light Weight PLA 3D Printer Filament 1.75mm 1kg - ZENIX Store LLC

Esun PLA-LW Light Weight PLA 3D Print Filament 1.75mm 1kg, Rising Sun FPV

eSUN PLA+ Filament PLA Plus 3D Printer Filament PLA Pro

eSUN PLA-LW 3D Printer Filament 1.75mm 1KG 2.2LBS 3D Printing Filament Light Weight foam Material aircraft - Smith3D Malaysia

PLA+ Light blue 3D filament is an upgrade compared to normal eSun PLA filament. It is suitable for all 3D printers and replaces PLA completely. The material is made entirely from corn grain suitable for printing of larger objects and stringing problems are from the past with PLA+. It is easy to 3D print with normal PLA settings at about 205 degrees using any 3D printer. Experience a smoother 3D print experience with this great material.

eSUN Marble PLA Filament 1.75mm, Marble Color 3D Printer Filament PLA, Dimensional Accuracy +/- 0.05mm, 1kg Spool (2.2 lbs) 3D Printing Filament for

eSUN PLA+ Filament 1.75mm 1kg (2.2lb) – INTSERVO 3D Printing Store

eSUN ABS+ 1.75mm 3D Filament 1KG – eSUN Offical Store

Genuine eSUN PLA-LW Light Weight Filaments 1.75mm 1KG Colours for FDM 3D Printers filament with Spool

eSUN eSILK PLA Filaments 1.75mm 1KG – INTSERVO 3D Printing Store

eSUN ePLA-LW 3D Printer Filament 1.75mm 1KG 3D Printing Filament Light Weight foam Material for 3D Printer aircraft

eSUN etwinkling-PLA filament 1.75mm 1kg 3d printing filament for 3D Pr

Resin for 3D Printer. Lightweight PLA is specially developed for model aircraft. It is lightweight and low-density, which greatly improves the

eSUN Super Lightweight PLA 3D Printer Filament, 1.75mm 1KG Strong Paint Adhesion

Polymaker LW PLA Filament 1.75mm Black, Pre-Foamed PLA 800g Lightweight 3D Filament - PolyLite 3D Printer LW-PLA for Printing RC Plane, 190-210 °C Printing Temp., High Rigidity