Sonoff Mini R2 - Switch port connected to mains or neutral - eWeLink Forum

Hi! I’m trying to run a 3-way circuit with a Mini R2. In order to do this, I’m required to run an extra wire from existing installation, as the far side switch middle port connects shared mains, and so I need a new wire there to connect it instead with S2. I saw that there are some other models as well as clones that allow the switch port to receive either mains or neutral and I’m wondering if anyone has ever tried such. Specially if S1 or S2 (which is the sensing one?) are GND it may work wi

Will a Sonoff Mini R2 work here? Only black, white and non-shielded ground : r/sonoff

SONOFF iHost Smart Home Hub

Episodes – Page 2 – SuperHouse Automation

Connecting a 3-Way in MINI R4 in a different way - Free discussion - eWeLink Forum

Sonoff Mini R3 Smart Switch Without Neutral 16A

Flashing Sonoff Mini R2 running firmware 3.7.6 instructions - ESPHome - Home Assistant Community

Sonoff Mini R4 Extreme does not detect button press when bulb is connected to switchwire - Free discussion - eWeLink Forum

Episodes – Page 2 – SuperHouse Automation

Sonoff Mini in UK - Switched Live? - Hardware - Home Assistant Community

Sonoff mini r2 turn itself off - eWeLink Forum

Will a Sonoff Mini R2 work here? Only black, white and non-shielded ground : r/sonoff

SONOFF SV Safe Voltage WiFi Wireless Switch Smart Home Module Support Secondary Development

Sonoff Mini EU - Netherlands No Neutral installation? - Hardware - Home Assistant Community