STL file Hexagon RGB/LED Wall Light/lamp 🏠・3D printing design to download・Cults

This is the files for making a hexagon RGB wall art/light. I have made som different starters, different panels with different holes, to suit more patterns The front panel is made 1mm thin. The panel has 8cm long walls, on the inside, so for 3M RGB/LED, you have lights for 6 Panels. 5M RGB/LED and you have for 10 panels. Made some holes at all corners, to make it easier for mounting to the wall. The two small holes, is for 2 rivets. Holes are 3mm wide, and i recommend 3x10mm rivet (Only had 3x8mm, and that worked, but close not to). If you need some with more or different holes, let me know, and i can add this. I printed mine in PLA, and that work perfectly. My frontpanels warped a bit for me, so i mounted them, and put some pressure on them (coffe mugs on top), over the night, and then all was good. I used sartano a 3M RGB kit for mine. Hope you will enjoy!