Eryone Silk PLA

Eryone Silk PLA Filament,Reviewed by Parliamo di Maker Feature： Smooth surface, high gloss, little laminated striation. Wide applicable temperature range. Toughness, real silk Silk PLAare close to standard PLA in material properties but it’s tougher and glossier than PLA. Specifications： Filament Diameter: 1.75mm Toler
Eryone Silk PLA Filament,Reviewedby Parliamo di MakerFeature：Smooth surface, high gloss, little laminated striation.Wide applicable temperature range.Toughness, real silkSilk PLAare close to standard PLA in material properties but it’s tougher and glossier than PLA.Specifications：Filament Diameter: 1.75mmTolerance: ±0.05mmPrinting Temperature: 190°C-220°CHeated Bed Temperature: 55-70°CPrinting Speed: 30－60mm/sFAQ 1.Q: Why my object printed with silk filament has no glossy surface?A: You need to make sure that the printing temperature matches well with the printing speed. You need to adjust the printing temperature to 200-220℃.2.Q: I failed to print small models with silk PLA. Why?A: Silk PLA has silk texture, smooth surface and strong toughness, which is not suitable for printing high-precision or small-sized models.3.Q: Why my filament tangles? How can I solve it?A: The tangle of filament isn’t caused by the disordered or the imperfect winding. According to the production technology of filament, the filament winds back and forth (from left to right and then from right to left). Normally, there is no overline tangle. A common cause of tangle is that the filament end is not fixed to the holes of spool. Overline tangle or the changed winding direction make filament tangle. So customers need to fix the filament end to the proper holes of the spool.4.Q: Can PLA be used to print tableware?A: Not recommended. Although PLA is degradable, food-grade raw material, the PLA with toughener is non-food grade. If you really want to print a set of tableware, transparent PLA is suggested.5.Q: The nozzle is clogged by PLA, and how can I solve it? A: Inconstant filament diameter, the lower nozzle temperature and frequent replacement with different kinds of filaments will lead to this problem. So, before you get started, clean the nozzle and turn up the temperature to a proper value.6.Q: My prints have web-like strings (stringing) issues. How can I troubleshoot it? A: Too high temperature makes the PLA filament melt and flow so fast. Please turn the temperature down to a proper value. The retracting parameters are improper, so adjust the retracting length and speed. 7.Q: There are too much melted filament around the nozzle. What should I do? A: This problem can be attributed to over-high temperature, low printing speed, and in the slice software, the nozzle diameter doesn’t match with the extrusion output.8.Q: The PLA filament was perfect when I opened the package. After several times of intermittent printing, my PLA filament snaps by accident during printing. Why?A: Normally, the PLA filament in the printing process will not snap by themselves. However, after being affected by moisture, the degradable material PLA will be more brittle and easier to break, so you should pay attention to dampproof.9.Q: The surface of my print isn’t very smooth. Why? A: The printing temperature is too high or too low. The temperature doesn’t match well with the printing speed. You need to adjust the printing speed or temperature.10.Q: Why my PLA-printed objects don't stick to the heated bed? How do I solve?A: The distance between the nozzle and the bed is too far. Make sure your heated bed is leveled and it’s clean. Then judge if the printing temperature and heated bed temperature are too low, and our customers should adjust them to correct ranges.

1.【Shiny Silk Coextruded PLA】- Smooth and shiny finish like real silk, no extra polishing needed. 1/3 of each combination of magicPLA coextruded

ERYONE Silk Tri-Color Coextrusion PLA Filament,3D Printer 1.75mm +/- 0.03mm, Triple Color Filament 0.25kg/spools,4Pack(2.2lbs), Red/Gold/Black

Pla Silk Dual Color 3d Printer Filament 3d Printing Material - Temu

Silk PLA Filament 1.75Mm for 3D Printer -ERYONE Silk Dual/Tri Color Shiny PLA Di

Eryone Ultra SILK PLA Filament 3D Printing 3d Filament 1.75mm for 3D Printer and 3D Pen,1 Roll

1.【Silk Dichromatic Filament】ERYONE dual-color silk filament is made from two individual colors, extruded into one filament strand.You can change the

ERYONE Silk Dual Color Filament PLA 3D Printer 1.75mm +/- 0.03mm, Coextrusion Filament PLA Shiny Filament 1kg(2.2lbs), Blue Green

ERYONE Triple-Color Silk PLA Filament for 3D Printers,1kg (2.2LBS)/Spo

ERYONE Ultra Silk PLA Filament

Factory Direct Sale 3D Printing Application PLA Filament Eryone 3D Printer Silk PLA Filament Bulk 1.75 1kg - China PLA ABS PETG 3D Printer Filament, 1.75 mm Filament