ESP32 4.7”E-ink Display 960×540 - DFRobot

Integrated with the ESP32-S3-WROOM-1-N16R18, this 540*960 @4.7" E-ink display comes with 16MB Flash and 8MB PSRAM, which supports 16 grayscale levels and partial refresh.
DFRobot provides open-source hardware, kits and robotics dedicated to bringing innovative electronics.

2.13”e-ink Display Module with ESP32 MCU Wiki - DFRobot

ESP32 4.7”E-ink Display 960×540 Wiki - DFRobot

2.13”e-ink Display Module with ESP32 MCU Wiki - DFRobot

2.13”e-ink Display Module with ESP32 MCU Wiki - DFRobot

Frage der Einrichtung mit Display E-ink - Deutsch - Arduino Forum

ESP32 4.7”E-ink Display 960×540 Wiki - DFRobot

M5Paper v1.1 is M5Stacks latest core device with a touch enabled E-ink display. Powered by the ESP32-D0WDQ6-V3 this is our first device to integrate a

M5Paper ESP32 Development Kit V1.1 (960X540, 4.7 eInk display, 235 ppi)

2.13”e-ink Display Module with ESP32 MCU Wiki - DFRobot

2.13”e-ink Display Module with ESP32 MCU Wiki - DFRobot

M5Stack ESP32 Core Ink Development Kit (1.54-In E-Ink Display) - RobotShop

DFR0835 - DF Robot

M5Stack ESP32 Core Ink Development Kit (1.54'' elnk display) – Makerlab Electronics