Everpure 4FC Filter Cartridge (EV9692-27) – Oasis H2O

Specs - Capacity: 15,000 gallons - Maximum Flow Rate: 2.5 gallons per minute - Micron Rating: 0.2 (1/100,000th of an inch) - Filtration Design: Fibredyne-II Carbon Block - Certifications: NSF/ANSI Standard 42 & 53 - Pressure Requirements 10 - 125 psi (0.7 - 8.6 bar), non-shock - Temperature Requirements 35 - 100°F
Specs - Capacity: 15,000 gallons - Maximum Flow Rate: 2.5 gallons per minute - Micron Rating: 0.2 (1/100,000th of an inch) - Filtration Design: Fibredyne-II Carbon Block - Certifications: NSF/ANSI Standard 42 & 53 - Pressure Requirements 10 - 125 psi (0.7 - 8.6 bar), non-shock - Temperature Requirements 35 - 100°F (2 - 38°C) - Overall Dimensions 14.5 H x 3.25 D (36.8 cm x 8.3 cm) Application - Fountain - Combination Systems Benefits and Features - Reduces chlorine taste & odor and other offensive contaminants that can adversely affect the taste of beverages. - Sanitary cartridge replacement is simple, quick and clean; internal filter parts are never exposed to handling or contamination. - Protects drink system seals, pump, tubing and small orifices from clogging, corrosion and abrasive wear. - Improves the taste of fountain beverages and helps retain the drink’s carbonation. - Increased capacity for extended reduction of chemical and mechanical contaminants. - Balanced cartridge for optimum performance in varying water qualities. - Compatible with Coldrink®, QC7I, QL2, QL3B, QL3 Heads, and High Flow CSR manifolds. - Proprietary Fibredyne™ II filtration media effectively inhibits the growth of bacteria on the filter media that can decrease product life. - Exclusive Fibredyne™ II media provides superior chlorine taste & odor reduction and micro-filters dirt and particles as small as 0.2* micron in size by mechanical means. - Validated by ISO 17025 accredited lab for 99.999% reduction of Pseudomonas diminuta following the ASTM F838-05 protocol for the validation of 0.2 μm sterilizing grade filters. Operational Tips - Replace cartridge when flow rate becomes inconveniently slow or before rated capacity is reached. It is recommended to replace cartridge at least once per year. - Change cartridges when capacity is reached or when pressure falls below 10 psi (0.7 bar). - Always flush the filter cartridge at time of installation and cartridge change. Installation Tips - Install vertically so cartridge hangs down. - Allow 21 ⁄2” (6.35 cm) clearance below the cartridge for easy cartridge replacement. - Flush cartridge by running water through system for five (5) minutes at full flow.